DS1922L/DS1922T
iButton Temperature Loggers
with 8KB Data-Log Memory
ELECTRICAL CHARACTERISTICS (continued)
(V PUP = +3.0V to +5.25V.)
PARAMETER
SYMBOL
CONDITIONS
MIN
TYP
MAX
UNITS
Standard speed, V PUP > 4.5V
60
240
Presence-Detect Low Time
t PDL
Standard speed (Note 12)
Overdrive speed, V PUP > 4.5V (Note 12)
60
7
287
24
μs
Overdrive speed (Note 12)
7
28
Presence-Detect Sample Time
(Note 2)
t MSP
Standard speed, V PUP > 4.5V
Standard speed
65
71.5
75
75
μs
IO PIN: 1-Wire WRITE
Overdrive speed
Standard speed
8
60
9
120
Write-Zero Low Time
(Notes 2, 14)
t W0L
Overdrive Speed, V PUP > 4.5V (Note 12)
6
12
μs
Overdrive speed (Note 12)
7.5
12
Write-One Low Time
(Notes 2, 14)
t W1L
Standard speed
Overdrive speed
5
1
15
1.95
μs
IO PIN: 1-Wire READ
Read Low Time
(Notes 2, 15)
Read Sample Time
(Notes 2, 15)
t RL
t MSR
Standard speed
Overdrive speed
Standard speed
Overdrive speed
5
1
t RL +
t RL +
15 -
1.95 -
15
1.95
μs
μs
REAL-TIME CLOCK
Accuracy
See RTC Accuracy
graphs
min/
month
Frequency Deviation
F
-40°C to +85°C
0°C to +125°C
-300
-600
+60
+60
PPM
TEMPERATURE CONVERTER
Conversion Time
(Note 16)
Thermal Response Time
Constant (Note 17)
t CONV
RESP
8-bit mode
16-bit mode (11 bits)
Can package
30
240
130
75
600
ms
s
Conversion Error Without
Software Correction
Conversion Error with Software
Correction
(Notes 18, 19)
(Notes 19, 20)
See Temperature
Accuracy graphs
See Temperature
Accuracy graphs
°C
°C
Note 1:
Note 2:
Note 3:
Note 4:
Note 5:
Note 6:
Guaranteed by design, not production tested to -40°C or +125°C.
System requirement.
Maximum allowable pullup resistance is a function of the number of 1-Wire devices in the system and 1-Wire recovery
times. The specified value here applies to systems with only one device and with the minimum 1-Wire recovery times. For
more heavily loaded systems, an active pullup such as that found in the DS2480B may be required.
Capacitance on the data pin could be 800pF when V PUP is first applied. If a 2.2k Ω resistor is used to pull up the data line,
2.5μs after V PUP has been applied, the parasite capacitance does not affect normal communications.
V TL and V TH are functions of the internal supply voltage, which is a function of V PUP and the 1-Wire recovery times. The
V TH and V TL maximum specifications are valid at V PUP = 5.25V. In any case, V TL < V TH < V PUP .
Voltage below which, during a falling edge on IO, a logic 0 is detected.
Maxim Integrated
3
相关PDF资料
DS1923-F5# IBUTTON TEMP/HUMIDITY LOGGER F5
DS1961S-F3# IBUTTON EEPROM 1KBit F3
DS1963S-F5+ IBUTTON MONETARY SHA-1
DS1971-F3+ IBUTTON EEPROM 256KBIT F3
DS1972-F3+ IBUTTON EEPROM 1KBit F3
DS1973-F3+ IBUTTON EEPROM 4KBit F3
DS1977-F5# IBUTTON EEPROM 32KBit F5
DS1982-F5+ IBUTTON 1KBit ADD-ONLY F5
相关代理商/技术参数
DS1922L-F5#A20 功能描述:iButton RoHS:否 存储类型:SRAM 存储容量:512 B 组织: 工作电源电压:3 V to 5.25 V 接口类型:1-Wire 最大工作温度:+ 85 C 尺寸:17.35 mm x 5.89 mm 封装 / 箱体:F5 MicroCan 制造商:Maxim Integrated
DS1922L-F5#A22 功能描述:iButton RoHS:否 存储类型:SRAM 存储容量:512 B 组织: 工作电源电压:3 V to 5.25 V 接口类型:1-Wire 最大工作温度:+ 85 C 尺寸:17.35 mm x 5.89 mm 封装 / 箱体:F5 MicroCan 制造商:Maxim Integrated
DS1922L-F5#W 功能描述:iButton RoHS:否 存储类型:SRAM 存储容量:512 B 组织: 工作电源电压:3 V to 5.25 V 接口类型:1-Wire 最大工作温度:+ 85 C 尺寸:17.35 mm x 5.89 mm 封装 / 箱体:F5 MicroCan 制造商:Maxim Integrated
DS1922L-F5/A1E 功能描述:iButton RoHS:否 存储类型:SRAM 存储容量:512 B 组织: 工作电源电压:3 V to 5.25 V 接口类型:1-Wire 最大工作温度:+ 85 C 尺寸:17.35 mm x 5.89 mm 封装 / 箱体:F5 MicroCan 制造商:Maxim Integrated
DS1922L-F5/A20 功能描述:iButton RoHS:否 存储类型:SRAM 存储容量:512 B 组织: 工作电源电压:3 V to 5.25 V 接口类型:1-Wire 最大工作温度:+ 85 C 尺寸:17.35 mm x 5.89 mm 封装 / 箱体:F5 MicroCan 制造商:Maxim Integrated
DS1922L-F5+ 功能描述:iButton RoHS:否 存储类型:SRAM 存储容量:512 B 组织: 工作电源电压:3 V to 5.25 V 接口类型:1-Wire 最大工作温度:+ 85 C 尺寸:17.35 mm x 5.89 mm 封装 / 箱体:F5 MicroCan 制造商:Maxim Integrated
DS1922L-F50 制造商:Maxim Integrated Products 功能描述:THERMOCHRON,IBTN,F5,HI-RES,8 - Rail/Tube
DS1922L-F5W 功能描述:iButton RoHS:否 存储类型:SRAM 存储容量:512 B 组织: 工作电源电压:3 V to 5.25 V 接口类型:1-Wire 最大工作温度:+ 85 C 尺寸:17.35 mm x 5.89 mm 封装 / 箱体:F5 MicroCan 制造商:Maxim Integrated